LED grow light strip, 2 m
An LED strip designed for plant lighting, with light characteristics tailored to the needs of indoor plants. The LED strip is easy to install using double-sided tape or separate mounting clips – for example in a corner to illuminate a large houseplant, or under a shelf to light plants placed on a lower shelf. The strip length is 2 m and it can be cut to size at the marked points if required. When cutting, the silicone protection must be carefully sealed. The product’s three-year warranty does not cover cut LED strips that have clearly oxidised due to moisture – an uncut LED strip is protected from moisture inside the silicone sleeve. The power supply is intended for indoor use (IP20). Light output can be dimmed in five steps and timed in three steps. Select the desired timer setting via the inline switch: 8 h (on 8 h / off 16 h), 12 h (on 12 h / off 12 h) or 16 h (on 16 h / off 8 h). The timer controls both on and off functions. To change the timer setting, reset the timer by briefly disconnecting the LED strip from the power source.
Code
9610650
- Three year extended warranty
- Expert airam 247 support
- Fast and reliable delivery
Product Overview
For plant lighting, not suitable for general room lighting. Indoor use only
Power supply IP20
Material metal and plastic (PVC)
Strip length 2 m, width 10 mm
Cutting the LED grow light strip is possible but not recommended. When cutting, special attention must be paid to sealing the silicone protection
Fixed LED, 24 W
Spectrum 4000 K, cool white
Timer: 3-step, 8/12/16 hours. Reset by disconnecting from power
5-step dimming: 100 % / 80 % / 60 % / 40 % / 20 %
Lifetime approx. 25,000 h
Black cable, 2.7 m. Inline controller
Double-sided mounting tape and 6 mounting clips included